Front port view.
Transom view.
Front starboard view.
Front deck view.
Inside transom view.
Boat logo.
Building jigs and installing jigs to hold the hull in shape so it can be rebuilt.
Another view of jigs.
Rear view of all the jigs in place.
Front view of jigs.
Starboard view of old transom removed.
Another view of transom removed.
Gluing mahogany together with a spline for new transom.
New mahogany glued and clamped for new transom.
Turning hull upside down.
Rear port view of hull upside down.Starting to make patterns for bottom skin.
Rear starboard view of hull upside down.
Front view of hull upside down.
Bottom skin patterens made.
Front view of bottom skin patterens.
Starting to steam bend new ribs.
Bending another rib.
Port side new ribbs steamed around the outside of the hull.
Starboard ribbs bent around the hull.
Front view of stem removed.
Side view of stem removed.
Picture of old stem.
New stem installed.
New transom, inside keel, and two new stringers.
New oak ribs being installed.
All new ribs installed.
Front view of new ribs installed.
Starting to fit new keel cap.
Starboard rear view of new ribs and keel cap installed. Also old skin removed.
Front view ready to fit new skin.
Rear view of new skin being fit.
Front view of new skin being fit.
Rear view of port bottom with all the the new wood installed.
Front view of port bottom.
Rear starboard view of last piece of bottom ready to install.
Rear view of last starboard bottom piece installed.
Front starboard view of last bottom piece installed.
Rear view of new transom and bottom installed.
Laminating new outside stem.
Starting to fit new outside keel.
Another view of new outside keel.
Rear view applying epoxy for the new outside keel.
Front view of glue being applied.
