Boat in finished state
Finished view - close up
Finished view - boat's side
Finished view of transom
Finished view of transom - close-up
Finished view - Interior
finished view - Dashboard
Front port view before starting project.
Rear starboard view.
Rear port view.
Front deck view.
View of roll over jig attached to transom.
Front roll over jig.
Rear starboard bottom.
Rear port view with old bottom removed.
Rear view of port side bottom removed.
Front view of port side bottom removed.
Rear starboard view of bottom removed and bootom plank removed.
Front port view.
Transom found to be bad and were removed.
New transom bottom frame and center transom frame.
All new transom frames installed.
New transom frames with new rear corners.
Rear view of new frames fit.
Port bottom frames fit.
Starboard frames being fit.
Starboard side frame ends removed ready for new wood.
Port side frame ends removed.
Old fore foot removed.
Old fore foot and 24 inches of stem removed.
New stem and fore foot installed.
Front view of stem, fore foot and new front frame installed.
Rear view of all new frames ready for a new keel.
Front view of all new frames.
Starboard view of new strut mount.
Port rear view of new strut mount.
Rear view of new keel.
Front view of new keel.
New starboard chine installed.
View of complete new starboard chine.
Rear view of starboard chine.
Front half of port chine installed.
Port rear view of first layer of bottom glued and held in place with tempory fasteners.
Starboard rear view of first layer applied.
Front view of first layer installed.
Port rear view of glue being applied between first and second bottom skin.
Second layer applied held in place with tempory fasteners.
Rear starboard view of second layer installed.
Front view of second layer installed.
Keel cap ready ro be glued in place.
