Front view of the boat with the 40 HP Mercury outboard removed.
Rear view of the project.
Front starboard view.
View from the driver seat.
Front port view.
Interior view.
View looking toward the transom before removing the wiring.
Another transom view.
Rear starboard view.
Starboard side view.
Rear roll over jig in place. All of the hardware and interior have been removed.
Front roll over jig in place.
Rear port bottom.
Rear starboard bottom view.
Keel damage.
Keel broke loose from the bottom.
Stripping off the old bottom paint.
Paint stripper being applied.
Rear port view of the bottom paint stripped and sanded. Also the keel has been removed.
Starboard front view of paint stripper applied.
Rear starboard view of the bottom stripped and sanded.
Front view of the bottom stripped and sanded.
Front view of glass cloth laid out on the bottom.
Rear port view of the glass laid out on the bottom.
Wetting out the glass cloth with West System epoxy.
Bottom with the first coat of epoxy applied.
Applying the second coat of epoxy..
Rear starboard view of the bottom with three coats of epoxy applied.
Rear port view with epoxy applied.
Front view with epoxy applied.
Sanding the first three coats of epoxy.
Applying two more coats of epoxy after sanding he first three.
Front view of the first three coats of epoxy sanded.
Another view of the last two coats of epoxy being applied.
Rear port view of all the epoxy applied.
Rear starboard view of all the epoxy applied.
Front view of all the epoxy applied.
Bottom mask off with the keel refit and ready to be epoxied in place.
Epoxy being applied to the bottom.
Keel being fastened in place.
Another view of epoxy being applied to the bottom. Keel off to the side with epoxy applied.
Stripping the starboard shear rail.
Another view of he shear rail being stripped.
Port front view of the shear rail stripped and sanded.
Starboard view of the shear rail stripped and sanded.
Starboard rear showing shear rail stripped.
Port shear rail stripped and sanded.
New fillets between the spray rail and the side of the hull being installed.
New port fillet installed.
New port fillet installed between the spray rail and the side.
