First day on the Continental
Another picture of the beginning.
Front starboard view of the beginning.
View of the instrument panel.
Front deck view.
Transom view.
Another starboard front view.
Starting to unload the pieces.
Deck hardware.
Inside view at the beginning.
Another inside view.
Old fuel tank and exhaust.
Inside view looking forward.
Damaged Chris Craft logo.
Starboard side logo.
Rotted cover board at the bow.
Starboard bow.
More deck hardware.
Instruments
Water lines and shaft coupling and shaft log.
Horn relay wiring.
Rear lifting bracket.
Another view of the rear lifting bracket.
Rotted rear starboard corner.
Power washing the inside.
Bad wood under the starboard fin.
Another view of the bad wood on the starboard rear corner.
Starboard fin removed.
Port fin removed.
Front starboard cover board removed along with some front deck.
Front port and starboard cover board removed.
Rotted wood at the bow.
Getting the hull ready to turn over.
Front port view with the hull turned over.
Rear starboard view upside down.
Port view upside down.
Port side planks removed.
Bow light and flag pole holder.
Front port view of the side planks removed.
Front starboard view of the side planks removed.
Rear starboard view of the side planks removed.
Bad wood on the port rear corner.
Transom planks removed.
Bad wood on the starboard rear corner.
Removing the port side bottom.
Front starboard bottom removed.
Rear view of the bottom removed.
Front view of the bottom removed.
Rudder and lifting bracket support.
Starting to replace the bottom frames.
