1960 18 ft Chris Craft Continental. I the shop 06/18/2020.
Starboard front view.
Rear starboard view.
Rear port view.
Instrument panel along with front cockpit.
Interior looking towards the transom.
Front deck.
Port rear corner.
Power washing the inside with the interior removed.
More washing.
Another view of the power washing being done.
All of the interior pieces.
Another view of the interior pieces removed.
Chrome ready to be inventoried and sent to the chrome shop.
Labeling wire connections so the engine can be removed.
Bad wood found in both engine stringers.
Engine removed we place a bag around it to keep it clean.
Rear transmission seal leaking.
Rear view of the engine removed.
Inside looking fotrward.
Inside looking towards the transom.
All together 84 pieces of chrome getting ready to be sent to the chrome shop.
Gluing up wood to repair the bad engine stringers.
Wiring night mare. We will just start over.
Another view of the old wiring.
Instrument panel before we removed the instruments to be sent out to be rebuilt.
Back side of the instruments before we box them up.
Instruments front face.
Steering wheel hub being disassembled so the steering wheel can be sent out top be rebuilt.
Steering wheel back side.
Another view of the steering wheel hub.
Hub with the horn mechanism removed.
Boat jigged up ready to be turned up side down.
Front roll over jig.
Another view of the rear roll over jig.
Front starboard view up side down.
Rear view up side down.
Front port view up side down.
Getting ready to remove the old bottom.
Another view of the old bottom fasteners being removed.
Starting to remove the old bottom.
Starboard side bottom removed.
Front view of the starboard side bottom removed and part of the port side.
Old bottom planks removed on the port side.
Complete port side bottom removed.
Complete bottom removed.
Front view of the complete bottom removed.
Port side broken chine.
Another picture of the starboard broken chine.
Bottom transom plank and bottom port side plank removed.
