Boat in the shop
Front view of the boat before we started taking it apart.
Rear view with all the deck hardware removed and the inside masked up.
Front starboard view with all the hardware removed.
Front port view.
Top port side plank removed and the port cover board. That revealed a bad top plate and the rail for the rub rail.
Rear view of the port side plank and the bad plank ends removed.
Port top plate bad and will have to be replaced.
Rear port view of old top plate removed.
Port side old top plate removed.
New top plate with epoxy applied and ready to install.
Another view of the new top plate with epoxy applied.
Epoxy applied to the framing to hold the new top plate.
Rear view of the new top plate installed.
Front view of the new top plate installed.
New top plate installed, faired with plywood skin applied. Almost ready for new planks.
Front view of the plywood skin installed.
New planking fit, ready to be epoxied in place.
Another view of the new planking fit ready to be installed.
Epoxy applied to the new planks before installing them.
Applying epoxy to the hull to accept the new planks.
Apling epoxy for the new top plank.
New top plank with epoxy applied.
