Getting ready to move the boat in the shop.
Another front starboard view.
Rear starboard view.
Front cockpit view. The instruments have been sent to Mark Clawson to be rebuilt.
Port side view.
Inside transom view with fuel tank removed.
View of the inside before we started.
In the shop for the first time.
Plenty of trash inside the hull.
More trash at the transom.
Another view of the inside being power washed.
Bilge after being washed.
Starting to remove the deck hardware.
Removing the cover boards before we turn the boat upside down.
Transom turn over jig installed.
Bow turn over jig installed.
The hull upside down.
Upside down with turn over jigs removed.
Front view upside down.
Starboard side of the bottom removed.
Removing the bottom screws.
Complete bottom removed.
Front view with the bottom removed.
Removing the bottom starboard side plank.
Starting to remove the transom planks.
Bottom port side plank removed, starting to remove the transom planks.
Bottom starboard side plank removed.
Laminating a new transom bottom frame along with gluing wood together to make the second bottom frame forward of the transom.
Marine Services Unlimited | 12114 E Houghton Lake Drive | Houghton Lake, Michigan 48629 | (989)422-6563 | email@example.com