1950 Chris Craft U 22
Her to complete the restoration. Custom seating and repower.
Alot of stuff to remove, inventory, organize, and store.
Another rear starboard view.
Alot of stuff.
Starting to remove the mess from the boat and organize.
Starting to organize the chrome for the chrome shop.
Real nice Mahogany board with a major oil stain.
Instrument panel before we remove the instruments.
Chrome getting ready to be sent to the chrome shop. Waiting on transom guards, stern lite hardware.
Hull jigged up ready to be turned upside down.
Rear rollover jig installed,
Upside down. Next get the hull in position and attached to the carts.
Rear view of the hull upside down still attached to the roll over jig.
Upside down attached to the cart with the roll over jigs removed.
Starting to rout off two planks on the starboard side.
Another view of the planks being routed off.
Big vacuum set up to catch the fine dust from routing
Main parts of the two planks routed off.
Front view of the planks routed off. Now a lot of sanding and fairing to clean up the side.
Removing the rest of the side planks and epoxy.
Another view of the remaining side plank and epoxy being removed.
Transom stripped and now being sanded to accept a new skin.
Bottom extensions to cover the end grain of the new skin.
Boat ready for the extensions.
Extensions mounted.
